Finishing Equipment Warranty

Chiller Warranty

Spare Parts Warranty

Warranty

New Finishing Equipment and Conveyors

Effective January 1, 2018

 

Forenta warrants MAJOR COMPONENTS (Heads, Bucks, and Frames only) to be free from defects in

materials or workmanship which may cause failure under normal usage and intended service for a

period of  five  years  from  the date of shipment from  the factory. Damages  resulting  from

neglected  maintenance,  abuse  (such  as  any  damage  caused  by  pressing  on  metal  buttons)

or  improper adjustments will not be considered defects.  This does not include heating elements

used in electrically-heated heads and bucks.  (See Electrical Items below.)

 

Forenta  further  warrants  all  other  fabricated  components  and  outside  supplier  purchased

components  (excluding  electrical items, see below), used in the original manufacture, to be free

from defects in materials or workmanship, which may cause failure under normal usage and intended

service, for a period of  two years from date of shipment from the factory (ordinary wear, neglect,

abuse, accident, or deterioration due to corrosion, or breakdown of electrical parts due to high or

low voltages, not to be considered defects), subject to the following conditions:

 

Forenta  will  not  accept  nor  assume  any  liability  resulting  in  personal  injury  or

property  or  equipment  damages  caused  by  lack  of maintenance,  lack  of  attention  to  or

improper operation  of any  piece  of  equipment.   Failure  to  adhere  to  maintenance,  service

and operational procedures as recommended in the Instruction Manual for the equipment will void any

and all warranties.

 

Forenta does not warranty service labor in the replacement of parts covered under this warranty. In

certain applications, Forenta, at its discretion,  recognizing  that  a  defect  is  present  and

at  an  agreed  to  cost  prior  to  service  labor  being  performed,  will  reimburse  a

distributor or local service company to repair the defect or replace the defective part.

 

Expendables  (such  as  padding,  covers,  lubricants,  and  discs,  diaphragms  and  O-rings  of

valves  and  cylinders)  and  decorative  or protective trim and paints are not guaranteed.

 

Electrical items, timers, motors, vacuums and all other electrical components from outside

suppliers used in the original manufacture of Forenta Equipment carry the warranty of their

manufacturer or 120 days from date of shipment from Forenta. These parts must be returned to

Forenta under our normal return authorization policy or serviced by a repair shop authorized by the

motor manufac turer or Forenta.

 

Forenta's responsibility is limited to the furnishing of a replacement part FOB point of origin.

All replacement parts will be charged for, and credit under this warranty will be issued only if:

 

1. The returned part proves upon examination to have actually been defective in

workmanship or materials.

2. The serial number of the machine is supplied along with the

returned part.

3. The returned part has been sent with promptness prepaid to Forenta, L.P.

185 Cold Creek Drive Morristown, TN 37814

4. Must be received by Forenta within 30 days from

shipment of the replacement part.

 

This warranty does not include freight or handling charges incurred in repairing or replacing

defective parts or equipment.  Forenta is not responsible for garments damaged on this equipment or

for any consequential damages, loss or expenses arising in connection with the use of, or the

inability to use its equipment for any purposes whatever or for losses sustained by this equipment

being out of operation for any reason.  Forenta does not warrant any specific production rates for

any of its equipment.

 

This  warranty does  not include parts or equipment damaged by  accident, abuses, acts of God, acts

of third person, operation of equipment under unusual conditions or for which it was not

represented, or for causes beyond the company's control.

 

Since the age of a machine can only be determined by the serial number, warranty will be voided in

event of mutilation or removal of

serial plate from machine.  Resale or movement of equipment from original point of installation

automatically terminates this warranty.

 

This warranty is in lieu of all other warranties, expressed or implied, and is Forenta's sole

warranty. With respect to the equipment, Forenta makes no other warranty of any kind whatever

expressed or implied, and all implied warranties of merchantability and fitness for a particular

purpose,  which  exceed  the  above  obligation,  are  hereby  disclaimed  by  Forenta  and

excluded.   Forenta  does  not authorize the warranty as herein specified or to assume for it any

other liability.

 

 

Warranty

WATER CHILLERS

Effective January 1, 2018

 

Forenta warrants Compressors and frames to be free from defects in materials or workmanship which

may cause failure under normal usage and intended service for a period of five years from the date

of shipment from the factory.  Damages resulting from neglected maintenance, abuse or improper

adjustments will not be considered defects.

 

Forenta further warrants all other fabricated components and outside supplier purchased components

(excluding electrical items, see below), used in the original manufacture, to be free from defects

in materials or workmanship, which may cause failure under normal usage and intended service, for a

period of one year from date of shipment from the factory (ordinary wear, neglect, abuse, accident,

or deterioration due to corrosion, or breakdown of electrical parts due to high or low voltages,

not to be considered defects), subject to the following conditions:

 

Forenta will not accept nor assume any liability resulting in personal injury or property or

equipment damages caused by lack of maintenance,  lack  of  attention  to  or  improper  operation

of  this  equipment.    Failure  to  adhere  to  maintenance,  service  and operational procedures

as recommended in the Instruction Manual will void any and all warranties.

 

Forenta does not warranty service labor in the replacement of parts covered under this warranty. In

certain applications, Forenta, at its discretion, recognizing that a defect is present and at an

agreed to cost prior to service labor being performed, will reimburse a distributor or local

service company to repair the defect or replace the defective part.

 

Damages resulting from insufficient or lack of inhibited propylene glycol antifreeze are not

covered by this warranty.

 

Electrical items from outside suppliers used in the original manufacture of Forenta Equipment carry

the warranty of their manufacturer or 120 days from date of shipment from Forenta. These parts must

be returned to Forenta under our normal return authorization policy or serviced by a repair shop

authorized by the manufacturer or Forenta.

 

Forenta's  responsibility  is  limited  to  the  furnishing  of  a  replacement  part  FOB  point

of  origin.  All  replacement  parts  will  be charged for and credit under this warranty will be

issued only if:

 

1. The returned part proves upon examination to have actually been defective in

workmanship or materials.

2. The serial number of the machine is supplied along with the

returned part.

3. The returned part has been sent with promptness prepaid to Forenta, L.P.

185 Cold Creek Drive Morristown, TN 37814

4. Must be received by Forenta within 30 days from

shipment of the replacement part.

 

This warranty does not include freight or handling charges incurred  in repairing or  replacing

defective parts or  equipment. Forenta is not responsible for damages, loss or expenses arising in

connection with the use of, or the inability to use its equipment for any purposes  whatever or for

losses sustained by this  equipment being out of operation for any reason.   Forenta does not

warrant any specific production.

 

This warranty shall not include parts or equipment damaged by accident, abuses, acts of God, acts

of third person, operation of equipment under unusual conditions or for which it was not

represented, or for causes beyond the company's control.

 

Since the age of a machine can only be determined by the serial number, warranty will be voided in

event of mutilation or removal of serial plate from machine.   Resale or movement of equipment from

original point of installation automatically terminates this warranty.

 

This  warranty  is  in  lieu  of  all  other  warranties,  expressed  or  implied,  and  is

Forenta's  sole  warranty.  With  respect  to  the equipment,  Forenta  makes  no  other  warranty

of  any  kind  whatever  expressed  or  implied,  and  all  implied  warranties  of merchantability

and fitness for a particular purpose, which exceeds the above obligation, are hereby disclaimed by

Forenta and excluded.   Forenta does not authorize any person or corporation to increase the

warranty as herein specified or to assume for it any other liability.

 

Warranty

Replacement Parts

January 1, 2018

Forenta warrants all Forenta fabricated parts and purchased parts from outside suppliers, used to

replace or repair parts  on  Forenta  Finishing  Equipment,  Conveyors,  Chillers  and  Dry

Cleaning  Machines.   This  warranty applies  to parts purchased for immediate use and to parts

purchased for inventory.  The warranty starts with the date of shipment from Forenta.

 

Fabricated parts (excluding heads, bucks and frames) and outside supplier-purchased parts,

(excluding electrical items) furnished to replace an original part defective and under warranty,

carry the guarantee of the manufacturer or 120 days from date of shipment from Forenta,

whichever is greater.

 

When Forenta heads, bucks and frames are furnished to replace an original part defective

and under warranty, the  part  carries  the  guarantee  for  the  remaining  warranty  period

of  the original  head,  buck  or  frame  or  120  days, whichever is greater.

 

Example:   A  defective  buck  has  to  be  replaced  under  warranty  and  the  press  is  three

years  old.   The replacement buck would carry a two-year warranty.

 

Electrical  items  --  timers,  motors,  vacuums  and  all  other  electrical  components  which

fail  in  warranty  must  be returned to Forenta under our normal return authorization policy or

serviced by a repair shop authorized by the motor manufacturer or Forenta.

 

Forenta's responsibility is limited to the furnishing of a replacement part FOB point of origin.

All replacement parts will be charged for and credit under this warranty will be issued only if:

 

1. The returned part proves upon examination to have actually been defective in

workmanship or materials.

2. The serial number of the machine is supplied along with the

returned part.

3. The returned part has been sent with promptness prepaid to Forenta, L.P.

185 Cold Creek Drive Morristown, TN 37814

4. Must be received by Forenta within 30 days from

shipment of the replacement part.

 

All parts under warranty must be returned with our pre-approved return authorization and RA

tag attached.

 

Expendables (such as padding, covers, lubricants, and the disc diaphragms and o-rings of

valves and cylinders) and decorative or protective trim and paints are not guaranteed.

 

This warranty does not include labor, freight or handling charges, incurred repairing or replacing

defective parts or equipment, or for any consequential damages, loss or expense arising in

connection with use of or the inability to use by this  part or equipment  being  out  of not warranty

and any specific production rate from any of its equipment.